Factory related Vaastu Tips

When our business is doing well, we start our own products to promote the business. Factories are built to promote products so that our business spreads far and wide and gets maximum profit. But often people do not take special care of Vaastu while building factories, due to which many defects arise in the production, due to which the business also goes into loss. The factory is made by many people by making four walls at any place, keeping machines, etc. Direction etc. is not taken care of at all. Today, in this article, we have brought to you those things which should be taken care of especially at the time of construction of the factory, so that Vaastu defects can be avoided.
The main gate of the factory should always be in the North, East or North-East direction. North-east is called the north-east according to Vaastu. The face of Vaastu Purusha is in this direction. Hence, this direction remains above the main gate.
Machinery is the main item in the factory, special care should be taken of the direction before installing them. It should always be installed in the south, west, or south-west direction.
Light, heater, boiler, etc. should be installed in the south, east, or south-east to operate machinery.
Produced from raw materials. Therefore, the raw material should always be placed in the North-West or South-West. And after producing the finished goods from raw materials should be kept in North, East or North-East direction. By keeping the manufactured item in this direction, there is a possibility of selling it as soon as possible, because the element of this angle is air which is of unstable nature.
The factory head’s office should be in the north, east or north-east direction. The cashier should always sit facing north. The cash box should always be opened with the right hand in the north direction. Shri Yantra of Kuber, Mahalakshmi, and Sphatik should be established in the cash box.
The residence of the employees should be made in Vayavya. Even if the quarter is to be multistoried, its height should in no case be higher than the main factory. If production is done from raw materials in the factory, then security is also necessary there, for which if you have installed security guards, then their room should be on the right side of the main gate.
While building, less space should be kept in South and West and more open space in North East. Heavy and big trees should be planted in the south and west direction.
It will be beneficial to build a temple in a factory. If a temple is built in a factory, then its direction should always be towards the north.
A place should be earmarked in the North-West direction of the factory for the purpose of weighing the goods, calculating the goods, etc.
Gaw Mukhi shape is beneficial for the construction of the factory. In this shape, the front part is narrow and the back part is wide. This gives profit in production and all kinds of Vastu defects are removed.
Factory chimneys should be placed in the southeast, which will automatically remove many Vastu defects. Underground water tanks should be made in the northeast.
Inside the office or factory, the staircase should always be made in the south, west, or south-west part, the ladder should always rotate in the clockwise direction.
According to Vaastu, the slope of the factory floor should be from South-West to North-East. All management related to water should be towards North-East.

Your Comment:

Related Posts



Importance of marriage in modern times

Marriage has been an important and sacred part of the tradition in Indian society. Rather, say that marriage is not considered to be of one birth but a sacred bond of seven births. Marriage is not a relationship of living together with a young man and a young woman, but it has also been establishing a valuable […]